Firenzecolor MIAMI+NEW YORK

Venetian Plasters, Metallic Finishes, Concrete Floor Systems

At Firenzecolor MIAMI+NEW YORK, our mission has been to educate both the Plastering and Interior Decorating communities of the value of historical products and methods of application that have been used in Europe as traditional wall finishes for centuries.

Combining the environmentally friendly natural products produced in this traditional method with modern techniques and taste., Firenzecolor products  have become a favorite among Architects, Interior Designers, and Italian plaster applicators.

We consistently fulfill our continued goal of supplying  a wide selection of the best decorative coatings on the market as well  as the support and training to turn these products into beautiful spaces.

W2F Topcoat

Wall2Floor Coating.jpg
Wall2Floor Coating.jpg

W2F Topcoat

242.90

W2F Top Coat Component A & B (20 Kgs) 200 Sq. Ft. per 2 Coats

 

Wall2Floor is a multi-layered system that permits to achieve, on both horizontal and vertical interior surfaces, seamless continuous coating according to the most cutting-edge trends in high-end architecture.

 

The system is composed of:

 

LEVELING CEMENT CONTAINING FIBERS

Wall2Floor Rasal NF: levelling cement-based product for the preparation of the surface.

Approx Cov. 200 square feet per 1 coat depending on substrate.

 

ATHENA PRIMER FOR GOING OVER TILES

Wall2Floor Athena

Approx. Cov. 183 sq. ft. per Lt.

 

CEMENTACIOUS VENETIAN COMPOSED OF 2 PARTS

Wall2Floor Top Coat NF: decorative coating for horizontal and vertical surfaces

Wall2Floor Component B: specific additive in powder for Wall2Floor Top Coat NF.

Approx. Cov. 200 sq. ft. per 20 kilos based on a two coat application. Coverage depends on substrate.

 

2 PART POLYURETHANE PRIMER FOR EXTRA DURABILITY 

Wall2Floor Primer A: A component for high penetrating bicomponent primer.

Wall2Floor Primer B: B component for high penetrating bicomponent primer.

 Approx. Cov. 750 sq. ft. per 3/4 liter depending on substrate.

 

2 PART POLYURETHANE CLEAR COAT (MATTE, SATIN, OR HIGH GLOSS)

Wall2Floor Clear Finish A: A component for bi-component polyurethane finish, matte, satin, or high gloss

Wall2Floor Clear Finish NF B: B component for bi-component polyurethane finish

Approx. Cover. 240 sq. ft. per 1 coat.

Quantity:
Add To Cart

Order online before and we will have it ready for local pick up.

1-877-347-3693